Introduction:
The 2020 Ford Super Duty is a popular pickup truck, but it can present some wiring challenges when installing a flatbed without a factory plug from the bed. In this article, we will discuss a common wiring issue with the taillights and provide a solution to fix it. By following these steps, you can ensure that your tail lights function properly and avoid potential issues with your dashboard lights, heater fan, and more.
Step 1: Understanding the Wiring Configuration:
The wiring for the tail lights on a pickup truck with a factory pickup bed differs from the wiring needed when installing a flatbed without a factory plug. When the factory plug is removed, two wires are left disconnected, which can disrupt the functioning of various dashboard controls. These wires are essential for the proper operation of the heater fan and dashboard lights, among other things.
Step 2: Identifying the Wires:
To fix the wiring problem, you need to connect the two disconnected wires in a loop and integrate them back into the system. The wires that need to be connected are a purple wire with an orange stripe and a gray wire also with an orange stripe. These wires are crucial for the smooth functioning of your taillights and other systems related to the dashboard.
Step 3: Connecting the Wires:
To connect the wires, follow these steps:
1. Locate the wires on the disconnected side of the plug.
2. The purple wire with an orange stripe should be the top right wire.
3. The gray wire with an orange stripe should be the second wire from the top right.
4. Insert the purple wire into the corresponding purple wire with an orange stripe from the other side and secure them together.
5. Next, connect the gray wire with an orange stripe to the third wire from the right on the bottom.
6. Carefully loop the purple and gray wires, ensuring they are properly connected.
Step 4: Avoiding Confusion:
It is important to note that there is another gray wire with an orange stripe that should not be looped back. To avoid confusion, make sure you do not connect this wire. It is the wire next to the one you connected in step 5.
Conclusion:
By following these steps, you can efficiently fix the wiring problem in your 2020 Ford Super Duty when installing a flatbed without a factory plug from the bed. Remember to connect the specific wires mentioned to restore the proper functioning of your taillights and avoid any issues with your dashboard controls. This simple fix will prevent the disruption of essential features, such as the heater fan and dashboard lights. Ensure your vehicle is in optimal condition and enjoy a hassle-free driving experience with your Ford Super Duty.
Disclaimer: It is recommended to consult a professional mechanic or refer to the vehicle’s manual for accurate and detailed information regarding wiring issues. The information provided in this article is for reference purposes only. Always prioritize safety and seek expert advice when dealing with vehicle modifications or repairs.