Charging Your Huawei Watch without the Charger: A Complete Guide

Losing your smartwatch charger can be a major inconvenience, but what if you could charge it without the original charger? This tutorial provides a detailed guide on how to charge a Huawei watch (such as the GT2e model) without its charger. By following the step-by-step process, you’ll find that charging your smartwatch is a straightforward task that you can accomplish with a few simple tools.

Identifying the Connector Pins

1. Examine the Watch: The back of the Huawei watch has two connector pins for charging, along with object monitors.
2. Understand the Pin Layout: The top pin connects to the red wire, while the bottom one connects to the black wire.

Preparing the Charging Cable

1. Select a USB Cable: Any normal USB cable with four wires (red, black, white, and green) will work. You only need the red and black wires.
2. Strip the Wires: Remove the insulation from the red and black wires, and fold the red one over to create a makeshift pin.
3. Create a Connector: Twist the red wire into a small ball so that it can connect to the indent on the watch.
4. Prepare a Power Source: A 30-or-whatever power bank works perfectly, reducing the risk of electrical issues.

Charging Process

1. Position the Wires: Place the red wire at the top and the black wire at the bottom of the watch, mimicking the connector pins.
2. Test the Connection: Touch the pins to ensure that the watch starts charging. You should see a light indicator.
3. Secure the Wires: Tape the wires to the watch using insulation tape, making sure they’re snug.
4. Add Pressure if Needed: If the pins need more pressure to charge, place a toothpick on top of them and secure with tape.
5. Monitor the Charging: Check for the charging indicator on the watch and leave it to charge, preferably turned off.

Alternative Charging Technique (Using Toothpick)

1. Prepare a Toothpick: Break off the ends of a toothpick.
2. Position the Toothpick: Place it on top of the two pins to add pressure.
3. Secure with Tape: Stick the toothpick down with insulation tape, ensuring it’s secure.
4. Monitor Charging: Check to see if the watch is charging and leave it in place until charged.

Resources Mentioned

• USB Charging Cable: Any standard cable with red, black, white, and green wires.
• Power Bank: A strong power bank can be used to provide a safe power source.
• Insulation Tape: Regular rubber insulation tape to secure the wires.
• Toothpick: Used to apply pressure to the connector pins if needed.

Conclusion

Charging your Huawei watch without the original charger is an easy and cost-effective hack. With tools you likely have at home and following this guide, you can keep your smartwatch powered even when the charger is missing. It’s an easy way to save $20 to $30 on a new charger and avoid the inconvenience of losing the original one. Remember to like, subscribe, and share this helpful tip with others!