24
Table of Contents
The process of resetting the memory on older Shark Ion Robot vacuum cleaners (especially 700 series) is an essential task for those who wish to wipe the internal memory. If you’re dealing with such models, this guide will help you understand how to reset the Shark Ion Robot.
Key Points to Remember Before You Start
Before diving into the actual steps, let’s examine some key points:
- The Memory Reset Process: It involves removing a small button cell battery from the motherboard.
- Applicable Models: This process can be applied to specific models, including some 750s, 7285s, 700s, and some 800s.
- Result of Resetting: This will clear BIOS memory and reset everything, including Wi-Fi settings and schedules.
Step-by-Step Process to Reset Shark Ion Robot Vacuum Cleaner
Step 1: Access the Motherboard
- If you’re unfamiliar with disassembling the robot, consider watching instructional videos online.
- Carefully open the robot to expose the motherboard.
Step 2: Locate and Remove the Button Cell Battery
- Identify the little button cell battery on the motherboard.
- Carefully pop out the battery, as this will clear the BIOS memory.
Step 3: Wait for the Memory to Reset
- Wait for approximately five minutes to ensure the memory is fully reset.
Step 4: Reassemble the Robot
- Clip the button cell battery back in place.
- Reassemble the robot and ensure that everything is properly connected.
Step 5: Test the Robot
- Make sure to reconnect the main battery.
- Turn on the robot to confirm that the memory reset process has been successful.
Resources Mentioned
- Instructional Videos: These are online resources that can guide you through disassembling the robot, particularly if you are unfamiliar with the process.
Conclusion
Resetting an older Shark Ion Robot vacuum cleaner’s memory is a simple process that requires only a few tools and some patience. By following these steps, you can clear the memory, including Wi-Fi and schedule settings, and ensure that your robot performs at its best.