How to Reset Your VW Bluetooth Module: A Step-by-Step Guide

by parker
YouTube video

In this article, we will discuss how to reset the Bluetooth module in your VW Polo. If you are experiencing issues with your Bluetooth not working, such as not showing on your display or not connecting to your phone, resetting the module may help resolve the problem. We will provide a step-by-step process to guide you through the reset, ensuring that your Bluetooth module starts functioning properly again. So, let’s get started!

Step 1: Prepare for the Reset

To begin the reset process, locate the passenger seat in your VW Polo and push it all the way back. This will give you access to the Bluetooth module. Once the seat is pushed back, you will notice a styrofoam box just underneath it. Use your hands to gently pull the box out. It may be held down with velcro, so be sure to exert a little force.

Step 2: Flip Over the Styrofoam Box

After removing the styrofoam box, flip it over to reveal the wide connector at the back. This is the connector that needs to be manipulated in order to reset the Bluetooth module. Take your time to locate the connector, ensuring a clear view of it.

Step 3: Squeeze and Pull the Connector

Now, it’s time to reset the Bluetooth module. Squeeze the connector by applying gentle pressure and pull it towards you. As you pull, the connector may flip over, but don’t worry, this is normal. It is essential to disconnect the connector from the module to initiate the reset process.

Step 4: Reconnect the Connector

Once you have disconnected the wide connector, take a moment to inspect it for any dust or debris. Clean the connector if necessary. Then, reconnect the connector back into its original position on the Bluetooth module. Ensure that it is inserted securely to establish a proper connection.

Step 5: Lock the Connector

After reconnecting the connector, squeeze the connector ends again and flip them forward until they lock in place. This step is crucial as it ensures a secure and reliable connection between the module and the connector. Take a moment to verify that the connector is firmly locked before proceeding.

Step 6: Replace the Styrofoam Box

Now that the connector is securely connected, carefully place the styrofoam box back where it was originally positioned. Press down on the box to ensure that the velcro fastens it in place. This will prevent any unnecessary movement of the box, ensuring the stability of the Bluetooth module.

Step 7: Check the MFI Display

Once you have completed the reset process and securely replaced the styrofoam box, check your MFI display. You should now see that your phone menu is back on and the Bluetooth module is ready to be paired with your phone. If the reset was successful, the Bluetooth functionality should now be restored.

In conclusion, if you are facing issues with your VW Polo’s Bluetooth module, resetting it can often solve the problem. By following the step-by-step guide provided in this article, you can easily reset the module and ensure that it starts functioning properly again. Remember to pay attention to the details and take your time during the reset process to avoid any mistakes. If you have any further questions or encounter difficulties, you can visit our blog at for additional assistance.

Thank you for reading and we hope this guide has been helpful in resolving your VW Polo Bluetooth issues!

Related Videos

Adblock Detected

Please support us by disabling your AdBlocker extension from your browsers for our website.